Knowledge Base
23 Results found for "routing route policy"
11. Routing Fundamentals
This article introduces the basic concept of routing and the types of routing supported by Vigor Router. By the end of this article, we hope the readers will be able to read the routing table and get...
12. Change the default route by Route Policy
1. Go to Routing >> Load-Balance/Route Policy, enable Advance Mode. Click Index 1 to create a new policy for the Vigor Router. 2. To specify WAN interface for traffic, we need to: Enable this profile...
13. Local Network Setup and Management
This article introduces the LAN configuration of Vigor Router, including the basic TCP/IP settings, the DHCP options, and the VLAN configuration. Contents Router's LAN Interface TCP/IP Settings DHCP Server...
14. Load Balancing and Failover for multi-WAN Vigor Routers
Automatic Load Balancing By default, all the active WAN interfaces will join the load balance pool when they are connected, and the outgoing traffic can take one of the online WANs as their path; therefore...
15. IKEv2 EAP between NordVPN and Vigor Router
1. You will need a NordVPN account and download the NordVPN root CA certificate from https://downloads.nordvpn.com/certificates/root.der And copy Service Credentials in NordVPN. 2. Get the NordVPN server...
16. Designate the outgoing WAN for LAN Subnet
1. Create a Route Policy for traffic from LAN1 to go via WAN1: Enable the profile. Select Source IP Subnet and enter the IP range of LAN1 subnet. Select Interface as WAN1. Enable Failover to WAN2, so...
17. Single-Arm VPN Configuration
Single-Arm VPN allows the router's VPN to work only on the WAN interface, instead of working on traffic sent between LAN and WAN. When doing single-arm VPN, traffic arrives on the WAN interface, gets...
18. Troubleshoot VPN is up but no traffic
When the VPN shows online, but you cannot access the host on the remote network, here's are some troubleshooting tips. 1. If the remote PC allows ping? First, ping requests might be blocked by the PC's...
19. Access a Vigor130 in Bridge Mode
This article describes how to access the management page of a Vigor130 operates in bridge mode. When in bridge mode, a Vigor130 cannot be accessed directly since it acts as a modem; however, if the Internet...
20. Aggregate WAN's Bandwidth
If you have multiple WAN links, bandwidth aggregation can be achieved by Session-Based Load Balancing. Vigor Router offers two modes for WAN Load Balancing, IP-Based is the default configuration. It divides...