Knowledge Base
31 Results found for "IPsec General Setup Pre-Shared Key"
1. IPsec XAuth from iOS to Vigor Router
The iOS Setup 1. Run Smart VPN client and add a profile as follows: Select "IPsec Xauth" for Type Give the name of the profile Enter the router's WAN IP address or domain at Server Enter Account and Password...
2. IPsec Tunnel Main Mode between DrayTek Routers (Client with Dynamic IP)
VPN Server Setup 1. Go to VPN and Remote Access >>IPsec General Setup page and configure the General IPsec Pre-Shared Key. The Pre-Shared Key configured here will be used for authenticating all IPsec...
3. IPsec Tunnel Main Mode between DrayTek Routers (Client with Static IP)
VPN Server Setup 1. Create a VPN LAN to LAN profile for the peer VPN client router via VPN and Remote Access >> LAN to LAN, click on an available index to add a new profile. 2. Edit the profile as follows...
4. L2TP over IPsec VPN from Ubuntu to Vigor Router
This article demonstrates how to set up Vigor Router as VPN server, especially for Ubuntu, and how to establish an L2TP over IPsec VPN from Ubuntu (16.04) to the private network of Vigor Router. It covers...
5. L2TP over IPsec VPN between DrayTek Routers
This note is going to demonstrate how to establish L2TP over IPsec between two Vigor Routers with the following topology. VPN Server Setup 1. Set up IPsec pre-shared key, go to VPN and...
6. IPsec VPN between Zyxel VMG and Vigor Router
This application note demonstrates how to establish IPsec VPN tunnel between Vigor router and Zyxel VMG router. Suppose the Vigor Router has LAN subnet on IP address 192.168.24.0/24, and Zyxel VMG is...
7. IKEv2 VPN between DrayTek Routers
VPN Server (Dial-In) Settings 1. Go to VPN and Remote Access >> IPsec General Setup, Input Pre-shared Key Confirm Pre-Shared Key Click OK 2. Go to VPN and Remote Access >> LAN to LAN and click...
8. Add a Load Balance VPN Connection
Before setting up the tunnel, please make sure PPTP and IPsec service is enabled in VPN and Remote Access >> Remote Access Control. 1. On the VPN server (Dial-In Site), create an IPsec VPN profile. In...
9. Three-Sides Communication through VPN
It is common that a company has a headquarter and few branches locate at different places. The network administrator can establish a VPN tunnel between hear quarter and each branch, so the employees on...
10. IKEv2 VPN from macOS to Vigor Router
IKEv2 VPN Setup On macOS 1. Go to System Preferences >> Network and click '+' Select VPN for Interface Select IKEv2 for VPN Type Give a Service Name and click Create 2. Type the WAN IP or hostname...