Knowledge Base

VPN Setup on macOS 1. Go to System Preferences >> Network and click '+', Select "VPN" for Interface Select "Cisco IPsec" for VPN Type Give a Service Name Click Create 2. Enter the router's domain...

The Setup on Android 1 Go to Settings >> More >> VPN to add a VPN profile as follows: Select IPSec Xauth PSK for TYPE Enter the router's domain name or WAN IP address for SERVER ADDRESS Enter...

This article demonstrates LAN-to-LAN IPsec VPN between a DrayOS router and Vigor3900/2960. The network topology is shown below. We separate this article into two parts, to demonstrate how to establish...

VPN Server Setup 1. Create a VPN LAN to LAN profile for the peer VPN client router via VPN and Remote Access >> LAN to LAN, click on an available index to add a new profile. 2. Edit the profile as follows...

Configuring DrayTek router as a VPN Server 1. Go to VPN and Remote Access >> IPsec General Setup, and enter General Pre-Shared Key. 2. Go to VPN and Remote Access >> LAN to LAN, and click...

This document introduces how to create a Host-to-LAN VPN from Windows 7 Built-In VPN Client to a Vigor Router. In this example, we use L2TP over IPsec VPN. There will be two parts of contents, set up...

Connecting from Smart VPN Client Run Smart VPN client and Add a profile: Give a Profile Name Select L2TP over IPsec for Type Enter the IP or Domain Name of the VPN Server Enter User Name and Password...

Connecting VPN from macOS 1. Go to System Preferences >> Network. 2. Click + to add a new network and edit the profile as follows: Select VPN for Interface Select "L2TP over IPSec" for VPN Type...

Only Vigor-xxx ==>  but no Vigor-xxx <== It means the VPN peer does not get the VPN request at all. You should check the accessibility between the two VPN routers first by testing...

Connecting VPN from iOS 1. Go to Settings >> General >> VPN and tap Add VPN Configuration 2. Edit the configuration as follows: Select "IKEv2" for Type Type the WAN IP or hostname of the router...