Knowledge Base
23 Results found for "routing route policy"
1. Introduction to Route Policy
This document introduces the Route Policy (a.k.a., routing policy, or policy-based routing). This feature allows the network administrator to manage the outbound route base on the IP address, port number...
2. Forward traffic to other Internet Gateway Router
Go to Routing > Load-Balance/Route Policy, click an index number to create a new policy. Configure the policy as follows: Enable this policy. Enter Source IP as the IP address of the branch office...
3. Address Mapping by Route Policy
1. To add more IP addresss for the WAN interface, go to WAN >> Internet Access >> WAN >> Details Page. 2. For address mapping, go to Routing > Load Balance/Route Policy: create...
4. Use Country Object in Route Policy
Vigor routers can forward the traffic through multiple outgoing interfaces, such as WAN, VPN, and LAN. Network Administrator can create the Route Policy or Static Route to regulate the forwarding interface...
5. Designate a outgoing WAN for traffic to a certain Website
1. Go to Routing >> Load-Balance/ Route Policy, click on an available index number. 2. Enable this profile, and enter a comment. For Destination in the Criteria field, choose "Domain Name" and enter...
6. Use a Public IP on LAN using 'IP Routed Subnet' Interface
Suppose ISP provides a public IP subnet 211.100.200.152/255.255.255.252 for us, and the gateway IP is 211.100.200.158. The public IP addresses we can use are between 211.100.200.153 to 211.100.200.154...
7. Designate a Outgoing WAN for SIP Traffic
If there are multiple WAN interfaces, the router will balance the traffic among all the active WANs. However, we can designate a path for certain traffic by the feature Route Policy. For example, suppose...
8. PPTP VPN between DrayOS Router and Vigor3900/2960
This article demonstrates LAN to LAN PPTP VPN between Vigor Router and Vigor3900/2960 by the following topology. Vigor Router and Vigor3900/2960 can both be the VPN server and client. Therefore, we separate...
9. Make specific host use VPN tunnel as the default gateway
Assuming Vigor3900 is in the Head Office and Vigor2960 is in the Branch Office, network Administrator created a VPN between the two offices and wants to make specific PC behind Vigor2960 to send all traffics...
10. Allow LAN Client to Choose the Outgoing WAN by LAN IP Alias
To set up the LAN IP Alias on Vigor Router: 1. Go to LAN >> General Setup page, click Details Page for the LAN profile. 2. Click on LAN IP Alias button. 3. Configure LAN IP Alias settings on the...